Gross annulus of stator + rotor lamination OD/ID. Slot cutout area is NOT subtracted (confirmed simplification). Density/price come from the price table above — edit it to match your own grades.
Stator Winding (Copper)
Turns / slot
Bare wire dia. [mm]
Cu grade
Cu density [kg/m³]
Cu price [$/kg]
MLT factor
MLT = stack length × MLT factor (same simplified model as the DCR Calculator).
PMSM — Magnet
Magnet area / pole [mm²]
Magnet grade
Magnet density [kg/m³]
Magnet price [$/kg]
Total magnet volume = area/pole × poles × stack length. Density/price come from the price table above.
EESM — Rotor Field Winding
Rotor turns / pole
Rotor wire dia. [mm]
Uses the same Cu density / Cu price / MLT factor as the stator winding above. Slip ring / brush cost not included.
Induction — Rotor Cage
Rotor cage weight [kg]
Cage material
Cage material price [$/kg]
Simplified: total cage weight entered directly (bar/end-ring geometry not modeled).
Total material cost
$0.00
Cost Breakdown
Material cost only — labor, processing, yield loss and margin are NOT included.
Material Price Table (editable)
▾
Edit grade / density / price here — the dropdowns below stay in sync automatically. Saved in your browser (localStorage).